Someone standing near a caravan or horse float could tamper with its brakes, according to an advisory CISA published on November 19 about wireless trailer brake controllers made by Australian company Elecbrakes. Successful exploitation, CISA says, could let an attacker take control of a trailer's brakes, modify the firmware, disable the brake lights, change the brake conditions or switch off other critical safety features.
The affected controllers are the EB2, the VM1 and the older ELBC2000, which CISA says are deployed in Australia and New Zealand. The flaws were found by Patrick Forck and Jeremy McCarthy of Element Digital, who reported them to CISA.
Two critical bugs need no pairing
CISA lists three vulnerabilities, all affecting EB2 firmware 3.0.4.2.0 and earlier, VM1 firmware before 1.3.4.2.1, and every version of the ELBC2000. In order of severity:
- CVE-2026-96805 (CVSS v3.1 9.6, v4 8.5): missing authentication for a critical function. CISA says an in-range Bluetooth Low Energy device can write to the control interface and influence braking with no authentication or pairing.
- CVE-2026-125273 (CVSS v3.1 9.6, v4 8.5): no replay or command-integrity protection. Commands carry no sequence numbers, nonces or session tokens, so captured commands can be replayed, and the last command persists across sessions.
- CVE-2026-124281 (CVSS v3.1 6.1, v4 5.3): an unprotected firmware-update channel that may allow unauthorized firmware modification.
All three scores use an adjacent attack vector, meaning the attacker has to be physically close rather than anywhere on the internet. CISA says no known public exploitation of these flaws has been reported to it.
Why a brake controller is different
Most ICS advisories concern equipment bolted inside a plant. These units ride along on public roads, and the trailer's brakes are what stop a heavy load from pushing the tow vehicle. Earlier this year we covered a similar pattern in a car alarm whose Bluetooth key let attackers unlock and immobilise cars; the common thread is consumer vehicle gear that trusts whatever talks to it over the air.
Update EB2 to 3.0.4.4.3 and VM1 to 1.3.4.2.1
Elecbrakes has released fixed firmware: EB2 3.0.4.4.3 and VM1 1.3.4.2.1. Owners install it by opening the Elecbrakes app and running the firmware update.
There is no fix for the ELBC2000. It is the predecessor to the EB2 and VM1, is no longer sold, and CISA says the vendor is still determining how to address the vulnerabilities on that controller. Owners of the older unit should watch for further guidance from Elecbrakes.
The full advisory, ICSA-26-323-02, is on CISA's site. For anyone who tows, a firmware update on a phone app is a small price for knowing the brakes respond only to you.
This briefing is provided by IntelFusions for informational and defensive purposes only. It is based on sources assessed to be reliable at the time of writing, and analytic judgments carry the confidence levels indicated. Indicators of compromise are defanged; re-arm them only in controlled environments. IntelFusions is not affiliated with the organizations named and makes no warranty as to completeness or accuracy.